# DM Technologies – Precision Scientific Instruments

> DM Technologies is a European deep-tech scientific instrumentation manufacturer based in Liszki (near Kraków), Poland, founded and led by experimental physicists (CEO: Prof. Szymon Pustelny). The company designs and manufactures ultra-low-noise electronic instrumentation for quantum metrology, optically-pumped magnetometers (OPMs), atomic physics, dark-matter searches (GNOME collaboration), biomagnetics, quartz crystal microbalances (QCM), and laboratory automation. Over 140 instruments operate across 61 verified research sites in Europe, North America, South America, and Asia-Pacific.

## Core Expertise & Research Applications
- **Ultra-Low-Noise Current Generation**: Bipolar 8-channel current sources down to ~2 pA/√Hz at 10 kHz (Low-Range, 12.5 nA step resolution) and 10 pA/√Hz at 1 kHz (Standard Range) with 16-bit resolution and <5 ppm/°C thermal drift for magnetic field compensation and shimming coils.
- **Galvanically Isolated Signal Routing & QCM/RF Switching**: 3-channel bistable mechanical air-gap relay switches (DC to 1.5 GHz, −0.07 dB loss at 30 MHz, −90.0 dB isolation at 3 MHz, 0 mW steady-state coil dissipation) controlled via Python, LabVIEW, MATLAB, or USB/battery.
- **Global Time-Synchronized Data Acquisition**: 4-channel 16-bit analog DAQ with ±200 ns absolute GPS/UTC timing precision and integrated GMR magnetic-field & temperature sensors.
- **Biomedical & Life-Science Instrumentation (Bio-Sensing)**: Ultra-low-noise current drivers and active field compensation for wearable OPM-MEG brain imaging, magnetocardiography (MCG), and commercial biomagnetic diagnostics.
- **Selected Customer Institutions & Research Groups**: Harvard University, Princeton University, University of Oxford, PTB Berlin (Physikalisch-Technische Bundesanstalt), NPL (National Physical Laboratory UK), ICFO Barcelona, Forschungszentrum Jülich, Leibniz University Hannover, University of Illinois Urbana-Champaign (UIUC), University of California at Berkeley, Sandia National Laboratories, Tsinghua University, Peking University, USTC China, Zhejiang University, Oxford Quantum Circuits (OQC), Q.ANT, KRISS South Korea, TIFR India, JGU / Helmholtz Institute Mainz, California State University East Bay, Bucknell University, and Jagiellonian University.

## Flagship Scientific Instruments
### [Multichannel Current Source (MCS-8)](https://dmtechnologies.eu/dm-technologies-products/multichannel-current-source/)
- **Subtitle**: 8-Channel Ultra-Low-Noise Bipolar Programmable Current Source (Standard & Low-Range Versions)
- **Summary**: The DM Technologies Multichannel Current Source (MCS) is an ultra-stable, 8-channel bipolar current source engineered for precision magnetic field control, optically-pumped magnetometers (OPMs), atomic physics, and solid-state measurements. Available in both Standard Range (±4 mA / ±40 mA) and Low-Range (±0.4 mA / ±4 mA) configurations with 16-bit resolution and industry-leading current noise density.
- **Key Highlights**: Channels: 8 Independent (Bipolar, ground-referenced) | Current Noise: 10 pA/√Hz (< 2 pA/√Hz in Low-Range @ 10 kHz) | Resolution: 16-bit DAC (Down to 12.5 nA step (Low-Range)) | Thermal Drift: < 5 ppm/°C (Allan dev. 3×10⁻⁷ @ 700 s)
- **Supported Interfaces**: USB Virtual COM, LabVIEW VIs, Python / Serial ASCII, Standalone Front-Panel LCD
- **Manuals, Application Notes & Software**: [Multichannel Current Source (Standard Range) – User Manual](https://dmtechnologies.eu/wp-content/uploads/2021/01/MSC-Manual-January-2021.pdf), [Multichannel Current Source (Low-Range Version) – User Manual](https://dmtechnologies.eu/wp-content/uploads/2021/01/MSC-Low-Range-Manual-January-2021.pdf), [Multichannel Current Source – LabVIEW VIs & Control Package](https://dmtechnologies.eu/wp-content/uploads/2019/12/MSCLabview.zip), [Multichannel Current Source – Updated Control Suite](https://dmtechnologies.eu/wp-content/uploads/2024/09/Multichannel.zip)

### [Smart Multichannel Relay (SMR-3)](https://dmtechnologies.eu/dm-technologies-products/smart-multichannel-relay/)
- **Subtitle**: 3-Channel Galvanically Isolated RF & DC Programmable Relay Switch (DC to 1.5 GHz)
- **Summary**: The Smart Multichannel Relay (SMR) is a 3-channel programmable mechanical relay system providing true physical air-gap galvanic isolation from DC up to 1.5 GHz. Powered either via USB-C or internal Li/FeS2 AAA batteries to eliminate ground loops, the SMR enables zero-noise automated signal routing, sensor multiplexing, and remote laboratory automation via Python, LabVIEW, MATLAB, or dedicated GUI software.
- **Key Highlights**: Isolation: -90 dB @ 3 MHz (True galvanic air-gap relays) | Bandwidth: DC – 1.5 GHz (-0.07 dB insertion loss @ 30 MHz) | Contact Res.: < 200 mΩ (Up to 0.5 A / 30 V switching) | Power & Control: Battery / USB-C (Python, LabVIEW, MATLAB, GUI)
- **Supported Interfaces**: USB-C Serial, Python Package, Dedicated GUI App, LabVIEW & MATLAB, Manual Button Control
- **Manuals, Application Notes & Software**: [Smart Multichannel Relay (SMR) – User Manual & RF Appendices](https://dmtechnologies.eu/wp-content/uploads/2025/08/SMR-Manual-Sierpien-2025.pdf), [Application Note: 5–25 MHz Quartz Crystal Microbalance (QCM) Sequential Resonance Routing](https://dmtechnologies.eu/2026/11/21/qcm-measurement-switching-design/), [SMR Controller – GUI Software & Python Automation Package](https://dmtechnologies.eu/wp-content/uploads/2025/09/SMR-Controller.zip)

### [GPS Time-Disciplined Multi-Channel Data Acquisition System (GDL-110)](https://dmtechnologies.eu/dm-technologies-products/gps-data-acquisition-system/)
- **Subtitle**: 4-Channel 16-Bit Analog DAQ & Environmental Monitor with ±200 ns GPS/UTC Time Synchronization
- **Summary**: The GDL-110 is a 4-channel, 16-bit GPS-time-disciplined data acquisition system engineered for globally distributed measurement networks that require correlating signals from geographically separated laboratories with ±200 ns absolute UTC time precision. Proven in 24/7 continuous operation within the worldwide GNOME dark-matter search network, it combines 4 bipolar analog inputs (up to 1024 S/s) with dedicated digital magnetic-field (GMR) and temperature sensors plus built-in data backup.
- **Key Highlights**: Time Precision: ±200 ns UTC (GPS-disciplined clock) | Analog Inputs: 4 Ch • 16-bit (±1.25 V to ±10 V ranges) | Sampling Rate: Up to 1024 S/s (Power-of-2 selectable) | Env. Sensors: GMR + Temp. (±88..810 µT & -55..125°C)
- **Supported Interfaces**: USB Interface, GPS External Antenna, GMR Magnetic Probe, DS18B20 Temp. Probe, Internal Backup Buffer
- **Manuals, Application Notes & Software**: [GDL-110 GPS-Disciplined Data Acquisition System – User Manual](https://dmtechnologies.eu/wp-content/uploads/2019/08/GDL-110-Manual-July-2019.pdf), [GDL-110 Host Software & Drivers Package](https://dmtechnologies.eu/wp-content/uploads/2021/06/soft_gps.zip)

## Laboratory Case Studies & Application Notes
### [5 MHz. 15 MHz. 25 MHz. When Switching Becomes Part of QCM Measurement Design](https://dmtechnologies.eu/2026/11/21/qcm-measurement-switching-design/)
- **Domain**: Acoustic Sensors • Electrochemistry (EQCM) • Admittance Metrology
- **Key Metrics**: −0.07 dB (Transmission @ 30 MHz) | −71.6 dB (A–B Channel Isolation) | 0 mW (Steady Coil Dissipation) | DC–1.5 GHz (Operating Bandwidth)
- **Deployed Hardware**: Smart Multichannel Relay (SMR)
- **Summary**: When measuring high-overtone quartz crystal resonances, the electrical signal path matters almost as much as the acoustic sensor itself. Discover how the Smart Multichannel Relay (SMR) delivers −0.07 dB transmission loss at 30 MHz, −71.6 dB isolation, and zero continuous coil heating for multi-channel QCM, QCM-I, and EQCM arrays.

### [Sub-Second Earth-Crossing Dark Matter & Axion Wavefront Search](https://dmtechnologies.eu/2026/11/21/dark-matter-axion-search-gnome-network/)
- **Domain**: Fundamental Physics • Cosmic Wavefronts • GNOME
- **Key Metrics**: ±200 ns (Absolute UTC Time Lock) | 15+ Stations (Intercontinental Network) | 24/7 Run (Zero-Jitter Acquisition) | 3-Axis (Continuous Ambient Nulling)
- **Deployed Hardware**: GDL-110 GPS-Synchronized DAQ, Multichannel Current Source
- **Summary**: How the international GNOME collaboration correlates multi-pass optical atomic magnetometers across intercontinental baselines with sub-microsecond absolute UTC determinism and zero-drift magnetic compensation.

### [Ultra-Low Noise Dynamic Field Compensation for Wearable Brain Imaging (MEG/MCG)](https://dmtechnologies.eu/2026/11/21/wearable-meg-mcg-dynamic-field-compensation-opm/)
- **Domain**: Wearable MEG / MCG • Optically Pumped Magnetometers (OPM)
- **Key Metrics**: < 2 pA/√Hz (Noise Density (Low-Range)) | 12.5 nA (Monotonic Step Resolution) | 50/60 Hz (Dynamic Active Nulling) | 8 Channels (Simultaneous Bipolar Coils)
- **Deployed Hardware**: Multichannel Current Source (Low-Range)
- **Summary**: Active real-time compensation of 50/60 Hz mains interference and ambient Earth gradients inside magnetically shielded rooms (MSR) with < 2 pA/√Hz current noise density for cryogen-free wearable OPM arrays.

### [Sub-ppm Current Stability for Magneto-Optical Traps (MOT) & Primary Frequency Standards](https://dmtechnologies.eu/2026/11/21/sub-ppm-current-stability-optical-atomic-clocks-mot/)
- **Domain**: Cold Atom Trapping • Primary Metrology • Atomic Standards
- **Key Metrics**: < 5 ppm/°C (Thermal Drift Coefficient) | > 10,000 h (Continuous 24/7 Uptime) | 0 Crossover (True Zero Bipolar Monotonic) | 16-Bit (High-Precision Quantization)
- **Deployed Hardware**: Multichannel Current Source (8-Ch Ultra-Stable)
- **Summary**: Deploying 8-channel ultra-low-drift current sources at European National Metrology Institutes (NMIs) for continuous 24/7 cold atom trapping, optical lattice clocks, and relativistic geodesy baselines.

### [Galvanic Air-Gap Signal Routing & Zero-Noise Flux Bias for Cryogenic Quantum Hardware](https://dmtechnologies.eu/2026/11/21/superconducting-qubits-cryogenic-signal-routing-flux-bias/)
- **Domain**: Superconducting Qubits • Cryogenics • Sub-Kelvin Flux Tuning
- **Key Metrics**: −90.0 dB (Air-Gap Isolation @ 3 MHz) | 10 mK (Dilution Fridge Compatible) | 0 mW (Zero Coil Dissipation) | < 200 mΩ (Contact Resistance)
- **Deployed Hardware**: Smart Multichannel Relay (SMR), MCS Low-Noise Current Source
- **Summary**: True physical galvanic air-gap disconnection (−90 dB isolation at 3 MHz) and zero-noise Li/FeS₂ battery operation for flux tuning and qubit readout lines down to 10 mK dilution temperatures.

## Key Pages & Technical Resources
- [Full Technical Knowledge Base for LLMs (/llms-full.txt)](https://dmtechnologies.eu/llms-full.txt): Complete parameter tables, noise figures, RF isolation tables, FAQs, case studies, and academic references.
- [Products Catalog](https://dmtechnologies.eu/dm-technologies-products/): Overview and comparison of all DM Technologies instruments.
- [Case Studies & Applications Portal](https://dmtechnologies.eu/case-studies/): Peer-reviewed laboratory implementations, QCM application note, and 61-site global installations directory.
- [About DM Technologies](https://dmtechnologies.eu/company/): Company mission, scientific background, and global reach.
- [News & Releases](https://dmtechnologies.eu/news/): Product announcements, WOPM conference reports, and noise/Allan deviation test results.
- [Request a Formal Quotation](https://dmtechnologies.eu/request-a-quote/): B2B and academic RFQ portal for itemized institutional quotations.
- [Contact & Support](https://dmtechnologies.eu/contact/): Direct engineering consultation and API/driver support.

## Contact & International Distribution
- **Manufacturer**: DM Technologies, Ściejowice 278, 32-060 Liszki (Kraków Metropolitan Area), Poland
- **Email**: info@dmtechnologies.eu
- **Exclusive Representative in China**: Hefei Ke Liang Yun Instrument and Equipment (http://www.keliangyun.com/)
